Build code
Version 1.2
A 3.5-inch close-quarters recon drone for operations inside structures.
Engineered for close-quarters training and operations inside structures. The PA612 carbon fiber nylon airframe combines high strength, heat resistance, and durability, and integrated propeller guards add safety and survivability for indoor flight, tight corridors, and repeated training use.
Standard is the quickest to get flying: it powers up fast, launches fast, and is the simplest to operate.
GPS adds navigation, autonomous flight, and waypoint missions, at the cost of a slower startup and a little more weight. We recommend training with the GPS configuration.
Frame Kit is just the frame, printed in house and built for customization. It ships without electronics or a battery. You can still add a radio controller and video receiver below.
Need something else? More sensors and options, such as digital video or lidar, can be added on request.
No. The radio and video levels are independent. Mix any radio with any screen based on pilot preference and budget. All of this gear connects to, and is interchangeable with, every Sentinel Dynamics drone.
Paying with a purchase order or grant funds? Use Need a quote? and we will send a formal quote with our W-9.
Online ordering opens soon. Want one now? Request a quote and we will build it for you. The frame kit can be ordered online today.
Two flight configurations
The Standard configuration runs Betaflight with no GPS, so it powers up and launches fast and stays simple to fly. The GPS configuration adds a BZ-251 GPS module and runs ArduPilot or Betaflight, unlocking autonomous flight, waypoint mission planning, and expanded flight modes.
We recommend training with the GPS configuration. Ask about our pilot training when you request a quote.
Built for
Stable handling and confident maneuverability where larger or sensor-heavy platforms become limited.
See inside rooms, hallways, and stairwells before your team commits.
Suggested: StandardA compact, guarded drone for supporting teams as they move through a structure.
Suggested: StandardDurable enough for repeated training use and realistic CQB scenarios.
Suggested: Standard or GPSWaypoint missions and expanded flight modes when the job calls for autonomy.
Suggested: GPSStandard vs GPS
The airframe and propeller guards are the same. The GPS configuration adds navigation and autonomy.
| StandardLevel 1 · QR31-L1 | GPSLevel 2 · QR31-L2 | |
|---|---|---|
| Choose it if | You want the fastest, simplest launch | You need navigation, autonomy, or waypoint missions |
| Flight software | Betaflight | ArduPilot or Betaflight |
| GPS | None | BZ-251 GPS module |
| Autonomy | Manual flight | Autonomous flight and waypoint mission planning |
| Startup | Rapid startup, fast launch readiness | Slower startup sequence |
| Weight | Lightest | Added weight from the GPS module |
| Video | Analog | Analog |
| Training | User-friendly operation | Training recommended |
For the technical buyer
Common to both configurations unless noted.
In the box
A completed drone, set up and ready. Add the radio and screen if you need them.
Replacement parts ecosystem
Crashes are part of training. Every printed airframe part of the QR-31 is sold on its own, in the same PA612 carbon fiber nylon with the same print settings as your drone. Replace the part, not the drone. Tap a number to shop that part.



New to drones?
Plain-English meanings for the words you'll see above.
Questions
Standard runs Betaflight with no GPS for the fastest startup and simplest operation. GPS adds a BZ-251 module and runs ArduPilot or Betaflight for autonomous flight, waypoint missions, and expanded flight modes, with a slower startup and a little more weight.
Yes. The QR-31 Frame Kit is the frame on its own, printed in house from PA612 carbon fiber nylon with integrated propeller guards. It is made for DIY builders who want to install their own electronics, and it ships without electronics or a battery. Choose Frame Kit in step 1, add a radio controller and video receiver if you need them, and order it online.
Yes, to fly you need a radio controller and a video receiver. Choose them in the build, or use your own. All of our radios and screens work with every Sentinel Dynamics drone, and any radio pairs with any screen.
One battery is included. You can add spares in the build.
Yes. More sensors, combinations, and options, such as digital video or lidar, can be added on request. Use the quote button and tell us what you need.
We recommend training for the GPS configuration. We also offer pilot training for teams. Ask about it in your request.
Online ordering for the QR-31 opens soon. Build your QR-31 above and use Need a quote? to send us your build. We will follow up with pricing, availability, and a formal quote with our W-9 for purchase orders or grant funds.
The airframe is printed, so every structural part can be replaced on its own. The bottom plate, top plate, arms, and prop guard arms are sold individually in the Replacement Parts section above and in our store.
No. The QR-31 is sold and shipped to US addresses only and may not be exported.
Agency & team orders
Get a formal quote for multiple drones, ground gear, and training. Tell us how your team will use the QR-31 and we will put the right package together.